Search
Categories
Home > Suspension Components
Choose a sub category:
Coil Springs & Accessories Front Axle, Spindles, & Accessories Front Suspension
Suspension Arms, Bushings, & Accessories
Sort By:
1 2 3 4
Wehrs Hood Pin Clip Wehrs Hood Pin Clip

Not much trickery here just a standard hood pin clip.

Our Price: $0.75
Wehrs Heat Shrink Sleeve for Chain Wehrs Heat Shrink Sleeve for Chain

This description is showing the chain and the sleeve. This part number is for the HEAT SHRINK SLEEVE ONLY!

Our Price: $5.00
Wehrs Gun Drilled Hood Pins - No Flange Wehrs Gun Drilled Hood Pins - No Flange

Lightweight 1/2" -20 fine thread hood pin with the flange machined on them for the hood to sit on so you don't have to put a rubber hose on the pin. 4" long from flange to bottom of threads.

Our Price: $6.00
Wehrs STEEL SHOCK MOUNT BOLT Wehrs STEEL SHOCK MOUNT BOLT

These are a cross between a bolt and a shock pin. Don't trust the pin? These use a nut, like a bolt would.

Our Price: $6.75
Wehrs High Misalignment Spacers Wehrs High Misalignment Spacers


Our Price: $7.00
Wehrs Fuel Pump Blockoff Wehrs Fuel Pump Blockoff

Fits small block Chevrolet.

Our Price: $8.00
Wehrs Gun Drilled Hood Pins With Flange Wehrs Gun Drilled Hood Pins With Flange

Lightweight 1/2"-20 fine thread hood pins with the flange machined on them for the hood to sit on so you don't have to put a rubber hose on the pin.

Our Price: $8.00
Wehrs Plug Wire Keepers Wehrs Plug Wire Keepers

Keep your plug wires routed neatly, close to your engine block and away from those harmful header that will melt them. SOLD AS SET OF TWO.

Our Price: $9.75
Wehrs 12" Limit Chain Wehrs 12" Limit Chain

This description is showing the chain and the sleeve. This part number is the CHAIN ONLY!

Our Price: $10.00
Wehrs METRIC CALIPER SPACER 1/4" Wehrs METRIC CALIPER SPACER 1/4"

Metric caliper spacer for narrow rotors.

Our Price: $12.00
Wehrs DOUBLE ADJUSTER Wehrs DOUBLE ADJUSTER

This is a male female style adjuster that we use in our limit chain adjuster. We have been selling them to chassis builders who have been building their upper a-frames with them so caster/camber adjustments are quick and easy. We have the weld bungs for 1" od tube and the WM226 ball joint rings as well.

Our Price: $12.00
Wehrs A-FRAME SPACER 1/8" Wehrs A-FRAME SPACER 1/8"

Camber Shims take the place of a hard to handle stack of washers when making a camber change. Our 6" center shim has a sure lock design to help keep them in place.

Our Price: $13.00
Standard Clevis Standard Clevis

Standard Solid Clevis

Our Price: $14.00
Greasable Rod Ends 5/8" Thread 1/2" Hole Greasable Rod Ends 5/8" Thread 1/2" Hole

GREASABLE ROD ENDS 5/8" Thread 1/2" Hole Steel

Our Price: $14.00
Wehrs Tranny & Rear End Breather Sitting with Filter Wehrs Tranny & Rear End Breather Sitting with Filter

Adapts 1/2” ID Breather to -4AN line.

Our Price: $14.00
Greasable Rod Ends 5/8" Thread 5/8" Hole Greasable Rod Ends 5/8" Thread 5/8" Hole

GREASABLE ROD ENDS 5/8" Thread 5/8' Hole Steel

Our Price: $15.00
Wehrs Power Valve Tool Wehrs Power Valve Tool

Power Valve Tool. No need for the huge 1" wrench when changing your power valve.

Our Price: $15.00
Wehrs Engine Mount Spacers Wehrs Engine Mount Spacers

Lightweight engine spacer. Sold as pair.

Our Price: $15.00
Wehrs Clamp Ring Wehrs Clamp Ring

Narrow clamp ring.

Our Price: $16.00
Greasable Rod Ends 5/8" Thread 5/8" Hole Moly Greasable Rod Ends 5/8" Thread 5/8" Hole Moly

GREASABLE ROD ENDS 5/8" Thread 5/8' Hole Steel Moly

Our Price: $17.75
Greasable Steel Rod ONLY 3/4" Thread 3/4" Hole Greasable Steel Rod ONLY 3/4" Thread 3/4" Hole

Replacement Rod Ends for use with Out-Pace's Patented Greasable Rod End System - Right or Left

Our Price: $18.00
Wehrs CLAMP RING FOR SPRING CUP Wehrs CLAMP RING FOR SPRING CUP

Steel 1" wide clamp ring for a bolt on spring cup. You can weld the cup where you want on the clamp and have in removable. Many other applications for clamp rings also.

Our Price: $20.00
Standard Non-Greasable Steel Tubes 7/8" O.D. Round Standard Non-Greasable Steel Tubes 7/8" O.D. Round

5/8-18 Threads, .156″ Wall, 13/16" wrench Flats and Powdercoated Black for Long Life.

Our Price: $20.18
Non-Greasable Bent Left Steel Tubes 5/8" Rod Ends or 1" O.D. Non-Greasable Bent Left Steel Tubes 5/8" Rod Ends or 1" O.D.

Bent Design for Additional Clearance, Available in both 7/8″ or 1″ Welded O.D. Tubes.
Powdercoated Black for Long Life.

Our Price: $21.64
Wehrs 3/4" HOLE 3/16" THICK QUICK ADJUST 4-BAR PLATE Wehrs 3/4" HOLE 3/16" THICK QUICK ADJUST 4-BAR PLATE

3/4" Hole 3/16" thick quick adjust 4-bar plate.

Our Price: $22.00
Non Greasable Steel Tube 1" O.D. Round Non Greasable Steel Tube 1" O.D. Round

5/8-18 Threads, .065″ Wall and Powdercoated Black for Long Life.

Our Price: $22.64
Wehrs Strandard Clamp On Hood Pin Mount 1-1/2" Tube Wehrs Strandard Clamp On Hood Pin Mount 1-1/2" Tube

Clamp On Hood Pin Mount

Our Price: $23.00
Wehrs Strandard Clamp On Hood Pin Mount 1-1/4" Tube Wehrs Strandard Clamp On Hood Pin Mount 1-1/4" Tube


Our Price: $23.00
Wehrs CLAMP FOR LIMIT CHAIN Wehrs CLAMP FOR LIMIT CHAIN

Clamp for limit chains.

Our Price: $23.00
Non Greasable Steel Tube ONLY 1 1/4" Round Non Greasable Steel Tube ONLY 1 1/4" Round

3/4-16 Threads, .095″ Wall and Powdercoated Black for Long Life.
Typically used for Pullbar and Panhard Bar Applications. Custom lengths available.

Our Price: $24.50
   
 
1 2 3 4